Friends Engineering Company

• Machine Size (mm): FRIENDS 1400 - 2300
• Roller Dia. (mm):280, 320 / 360, 380
• Heating type: Steam / electric / oil
• Corrugated roller material: 48CrMo alloy steel / 52CrMo alloy steel
• Wallboard type: Oblique / square
• Transmission type: Gear box / chain
• Feeding type: Fingerless / fi nger
• Design speed: 100m/min 150m/min 200m/min
• Pneumatic working pressure: 0.4-0.9Mpa
• “Upper corrugated roller diameter”: 0280mm, 0320mm, 0350mm
• “Lower corrugated roller diameter”: 0280mm, 0320mm, 0380mm
• Pressure roller diameter: 0280mm, 0320mm, 0385mm
• Glue roller diameter: 0242mm, 0242mm, 0268mm
• Paste fixed roller diameter: 0127mm, 0127mm, 0140mm
• Preheat roller diameter: 1402mm, 1402mm, 1402mm
• Main driving motor: 11KW, 15KW, 30KW
• Wind suction motor: 11KW, 11KW, 11KW
• Control type: SIEMENS / SCHNEIDER
• Bearing: SKF / NBC / NACHI

• Size: 36", 42", 46", 52", 62"
• Motor (HP): 2, 3, 3, 5, 5
• Heating Load (KW): 15, 19, 18, 21, 25
• Wt. Approx: 3.0, 3.5, 4, 4.5, 5
• Floor space: 7"*5", 7.5"*15", 8"*15", 8.5"*15", 9.5"*15"

• Machine Size (mm): FRIENDS 1400 - 2300
• Roller Dia. (mm):280, 320 / 360, 380
• Heating type: Steam / electric / oil
• Corrugated roller material: 48CrMo alloy steel / 52CrMo alloy steel
• Wallboard type: Oblique / square
• Transmission type: Gear box / chain
• Feeding type: Fingerless / fi nger
• Design speed: 100m/min 150m/min 200m/min
• Pneumatic working pressure: 0.4-0.9Mpa
• “Upper corrugated roller diameter”: 0280mm, 0320mm, 0350mm
• “Lower corrugated roller diameter”: 0280mm, 0320mm, 0380mm
• Pressure roller diameter: 0280mm, 0320mm, 0385mm
• Glue roller diameter: 0242mm, 0242mm, 0268mm
• Paste fixed roller diameter: 0127mm, 0127mm, 0140mm
• Preheat roller diameter: 1402mm, 1402mm, 1402mm
• Main driving motor: 11KW, 15KW, 30KW
• Wind suction motor: 11KW, 11KW, 11KW
• Control type: SIEMENS / SCHNEIDER
• Bearing: SKF / NBC / NACHI

• Size: 36", 42", 46", 52", 62"
• Motor (HP): 2, 3, 3, 5, 5
• Heating Load (KW): 15, 19, 18, 21, 25
• Wt. Approx: 3.0, 3.5, 4, 4.5, 5
• Floor space: 7"*5", 7.5"*15", 8"*15", 8.5"*15", 9.5"*15"

In the interest of product upgradation/improvement, the manufacturer reserves the right to change the specifications and features without notice.

Specifications:

Reel to Sheet Cutter machine is designed to cut paper as well as 2 ply corrugated board (without damaging the flutes) in the form of sheets. This machine can be used as an independent unit or can be attached to a corrugating machine for direct & accurate sheet cutting. The cutting length can be infinitely varied in between the range (1.5) with a PIV gear box, comprising of imported chain. The belts convey the cut paper or 2 ply for manual collection. Separate reel stand is provided for paper cutting. The variable speed motor is provided as standard with this model. Reel to Sheet Cutter is also available without PIV Gear Box.

Specifications:

Size: 36", 42", 46", 52", 62"

Motor (HP): 2, 3, 3, 5, 5

Heating Load (KW): 15, 19, 18, 21, 25

Wt. Approx: 3.0, 3.5, 4, 4.5, 5

Floor space: 7"*5", 7.5"*15", 8"*15", 8.5"*15", 9.5"*15"

In the interest of product upgradation/improvement, the manufacturer reserves the right to change the specifications and features without notice.

Specifications:

Cutting and Creasing is the initial process carried out in the manufacture of a corrugated box. It is simultaneously carried over this machine. Two pairs of shafts have creasing and cutting heads mounted on them which can be easily set as required. Depending upon the thickness of the board (3 ply, 5 ply, 7 ply, 9 ply), separate creases are to be used. The sheets are piled on the feed table and fed through the machine by hand. In the interest of product upgradation/improvement, the manufacturer reserves the right to change the specifications and features without notice.

The sizes are standard, any special size required can be supplied on Request.

The next process after cutting and creasing of the sheet is slotting and corner cutting. It is simultaneously carried over this machine. Three slotting and one corner cutting die can be easily adjusted by gear rack mechanism. The upper dies move in an arc so that the board is slotted in a shearing manner. Two guides are provided on the feed table to support the sheets while cutting. In the interest of product upgradation/improvement, the manufacturer reserves the right to change the specifications and features without notice.

Specifications:

Size65"75"85"95"Motor (H.P.)2223Wt.Approx. (Tons1.722.22.8Floor Space7'×4'8'×4'9'×4'10'×4'

• Machine Size (mm): FRIENDS 1400 - 2300
• Roller Dia. (mm):280, 320 / 360, 380
• Heating type: Steam / electric / oil
• Corrugated roller material: 48CrMo alloy steel / 52CrMo alloy steel
• Wallboard type: Oblique / square
• Transmission type: Gear box / chain
• Feeding type: Fingerless / fi nger
• Design speed: 100m/min 150m/min 200m/min
• Pneumatic working pressure: 0.4-0.9Mpa
• “Upper corrugated roller diameter”: 0280mm, 0320mm, 0350mm
• “Lower corrugated roller diameter”: 0280mm, 0320mm, 0380mm
• Pressure roller diameter: 0280mm, 0320mm, 0385mm
• Glue roller diameter: 0242mm, 0242mm, 0268mm
• Paste fixed roller diameter: 0127mm, 0127mm, 0140mm
• Preheat roller diameter: 1402mm, 1402mm, 1402mm
• Main driving motor: 11KW, 15KW, 30KW
• Wind suction motor: 11KW, 11KW, 11KW
• Control type: SIEMENS / SCHNEIDER
• Bearing: SKF / NBC / NACHI

• Size: 36", 42", 46", 52", 62"
• Motor (HP): 2, 3, 3, 5, 5
• Heating Load (KW): 15, 19, 18, 21, 25
• Wt. Approx: 3.0, 3.5, 4, 4.5, 5
• Floor space: 7"*5", 7.5"*15", 8"*15", 8.5"*15", 9.5"*15"